Panther Paint and Varnish Remover 500ml

Revamp and redecorate any of the walls in your home easily with Panther Paint and Varnish Remover. Highly effective, the Panther Paint and Varnish Remover gets to work quickly removing your old coats of paint and varnish to leave you with a blank canvas – and the rest is up to you!

With a gel-like consistency, the Panther Paint and Varnish Remover is ideal for stripping paint and varnish from even the most difficult of surfaces, indoors or outdoors.

The Panther Paint and Varnish Remover will conveniently remove many different paint coatings, including most metal/ hammer type paints.

The Panther Paint and Varnish Remover 500ml is primarily for wood and masonry surfaces, you should test this product on an inconspicuous area before using on larger areas of metals or etc..

How to use the Panther Paint and Varnish Remover 500ml:

• As always, read all instructions and safety guidelines on the product label prior to use – note optimum conditions for use is between 5 and 25C, while avoiding direct sunlight. (This product is highly flammable).
• Adequately cover surfaces that are nearby that you don’t want to strip to protect them before beginning.
• Shake well before using, then pour a quantity of the paint remover into a suitable container and screw the cap back on the product to prevent spillages
• Apply the paint stripper generously with a brush to the area you want to strip paint from, dapping onto the surface and leave to blister (usually takes 10-15 minutes).
• Then apply more product to the area rubbing thoroughly into the blisters that have formed to allow to penetrate the paint coatings further.
• Leave to work for 15-30 minutes
• Try to remove the paint coatings with a stripping knife or a shaven hook, you can use a stuff bristled brush for any awkward areas. 
• It is recommended to only treat an area less than ½ meter squared at any time
• Repeat the treatment as necessary to remove all coatings
• When all coating has been removed, wipe clean using methylated spirits or barrettine white spirits and leave to dry out thoroughly – water can be used instead of spirits mentioned but it is not recommended as it may raise the grain on particular wood substrates.
• Once the surface is dry rub with fine sandpaper or a stainless-steel pad before redecorating
• Remove as much excess product from equipment before washing in warm soapy water.
• It is important not to empty the product into drains or watercourse. 
• You should also allow the layers of paint coats which have been removed to dry for a few hours before disposing in the correct manner.

How Panther Paint and Varnish Remover 500ml works:

Features of the Panther Paint and Varnish Remover 500ml:

• Highly effective paint remover and varnish remover
• Gel like formula to remove paint from any wood or masonry surfaces
• Suitable for use both indoor and outdoors
• Methylene chloride free.